Which sma adapter do you need?

The SMA adapter is a subminiature coaxial cable connector whose name is derived from the Sub-MiniatureA adapter. Usually used to transmit radio frequency signals. Its transmission frequency range is very wide, up to 50G or higher, and can provide RF connections between circuit boards. Many microwave components, including filters, attenuators, mixers and oscillators, all use SMA adapters. ZOMWAVE produces high-quality and durable SMA adapters, with low line loss, high shielding, and massive inventory. The stock will be shipped on the same day. Enter [SMA adapters] and place an order immediately.

SMA adapters are divided into test-grade adapters and production-grade adapters. Among all the connector levels, the test-level connector has the best performance and is generally used as a calibration part. In order to provide a high level of performance and reliability, the adapter will use a special medium and a slotless female connection. So that it can maintain good accuracy after multiple uses.

This kind of test-level transfer is used in the input and output of the instrument, or on the test equipment. It has better performance, smaller tolerance and longer service life.

There is also a production-grade SMA adapter, used in products, with relatively low performance, relatively large tolerances, limited number of connections, and relatively low prices. Every time you use this level of connector, you need to check the connector carefully. Generally, it will be used on the product. It does not need to be connected again after installation. The size of the outer conductor of the adapter is different to prevent incompatibility and error of the adapter. The connection method, the bad storage method can easily lead to the damage of the SMA adapter.

The SMA adapter is light, stable and durable, and meets international environmental standards. If you need SMA adapter , please contact ZOMWAVE.